Category: Thermoset
Coatings are cured on the product by exposing the coating and plastic to temperature. The coated product cures in a special oven at a temperature of 120-125 ° C, a primary drying process takes place at a lower temperature.
-
-
SilFORT PHC XH 100P
SilFORT* PHC XH100P hardcoat is a clear coat that promotes adhesion to various types and grades of PMMA (Polymethylmethacrylates). When thermally cured, it can provide enhanced abrasion resistance, combined with...
-
SilFORT AS 4700F
SILFORT* AS4700 silicone hardcoat and SILFORT SHP470 basecoat The SilFORT AS4700 hardcoat with the SilFORT SHP470 basecoat is a thermally cured abrasion resistant, weatherable silicone hardcoat designed to protect dark colored to...
-
-
SilFORT PHC 587B
SilFORT PHC587 premiumperformance hard coat is a clear, non-yellowing silicone coating that can offer optimal protection against deterioration from weather, including ultraviolet rays, heat, cold, rain, snow and ice comparable...
-
SilFORT PHC 587C2
SilFORT PHC587C premiumperformance silicone resin solution, after curing, is a clear, non-yellowing silicone coating, which can help provide excellent protection against coating- and/or substrate-deterioration from weather and ultraviolet rays, especially...
-
-
ENG_покрытие SilFORT PHC XH 100
SilFORT* PHC XH100P hardcoat is a clear coat that promotes adhesion to various types and grades of PMMA (Polymethylmethacrylates). When thermally cured, it can provide enhanced abrasion resistance, combined with...